LED-DRIVER, 18VA, 700MA, INCL.STRAIN RELIEF

length width height: 15,3 cm 6,7 cm 3,1 cm
voltage: 230 Volt
max. load: 18 Watt
Material: plastic housing
remarks: for the connection of 3 watt power LED's 700 ma
Weight: 0,190 kg

EMERGENCY KIT - The emergency pack (if required) is below.

The Orbik LED emergency conversion unit is compatible with most LED mains drivers and
can be configured to operate a single LED or a series LED array of up to a maximum of 10
LED’s. This conversion unit is compliant with EN61347-2-13 and will operate a range of
LED’s over the power range of 3W to 22W and the microprocessor controlled high-efficiency
mains monitoring and variable rate switched mode power supply ensure optimum battery
performance with minimum power consumption.
An innovative automatic power output sensing circuit monitors the voltage and current
demand and will detect and protect itself against over-current demands caused by someone
connecting the wrong load to the output terminals and a self-test option is also available to
carry out periodic testing in accordance with EN50172.

The LCM3350 LED conversion module delivers a current limited 350mA to the connected
device and is suitable for use with a single LED or cluster LED’s that can operate from less
than the 30V DC limit imposed by EN61347-2-13
Dimensions: 203mm x 42mm x 28mm
Fixing centres: 193mm
Weight: 0.3Kg